skip to content

Rowloft / field notes

How to Keep Track of Crochet Repeats

A blanket can be on row 38 and row 2 of a four-row repeat at the same time. Both numbers are useful. One tells you how much fabric you have made; the other tells you which instructions to work next.

The easiest record to read later keeps those numbers separate. Give each counter a specific job, decide when to advance it, and leave a note that names the next instruction. You can do this with pencil and paper, a mechanical counter, or a phone.

Separate rows, repeats, and stitches

Before starting a repeating section, identify what the pattern repeats. It might be a group of stitches across a row, a sequence of rows, or a set of rounds. These are different counting jobs.

For example, a hypothetical instruction might ask you to repeat a four-row sequence six times. You need to track your position within the four-row sequence and how many complete sequences you have worked. Counting stitches across one row will not tell you either number.

Write a small key:

  • Total rows: completed rows in this project or section.
  • Repeat position: the last completed row within the sequence.
  • Completed repeats: full sequences finished.

You may not need all three. If total rows already make completed repeats obvious, keep only the first two. The point is to remove ambiguity, not give yourself more numbers to maintain.

Mark where the repeat actually starts

Do not assume that the first row of the project is the first row of the repeat. A foundation, setup row, border, or opening section may come first.

Suppose your pattern has two setup rows, followed by a four-row repeat. After completing project row 10, you have worked eight rows of the repeating section: two complete repeats. Project row 11 will be row 1 of the next repeat.

A useful note is:

“Setup: project rows 1–2. Four-row repeat begins on project row 3.”

This is an invented example, not an instruction for a particular design. Use the starting point and numbering in your own pattern. If the designer counts the foundation differently, record that convention rather than silently renumbering the instructions.

Advance the counter after completing the row

Choose a counting habit and keep it consistent. A practical option is to count completed rows: finish the row, check the end, then advance the total once.

Under that convention, a counter showing 18 means row 18 is finished. The next instruction is for row 19. If your pattern uses a different local numbering system, your note should connect the two.

Avoid switching between tapping at the beginning and tapping at the end. That leaves the same number with two possible meanings. If you prefer counting the row you are currently working, that can work too, but label it clearly and keep a separate note when stopping mid-row.

Put the counter where you can reach it without putting down the work. Before a long session, try the routine for one repeat and check that the record agrees with the fabric.

Choose a repeat-tracking method

On paper, make one line for each full repeat and four boxes on that line for a four-row sequence. Check a box only after completing its row. Starting the next line makes the completed-repeat count visible without resetting anything.

With separate counters, give one the total-row job and another the repeat job. Avoid labels such as “Counter 2.” “Four-row lace repeat” is more useful when you return after a week.

Rowloft supports a main counter and additional counters within a project, so you can keep separate counts for a piece and its repeating section. Before relying on any linked-counter setup, work through a complete sample repeat and confirm what each displayed number means. A number of completed repeat blocks is not the same as your position inside the next block.

Choose the method you can maintain while crocheting. A simple record used consistently is more helpful than an elaborate setup you stop updating.

Keep across-row repeats separate

If the pattern says to repeat a stitch group across a row, track that job separately from the sequence of rows. Where the pattern allows, removable stitch markers can divide the row into groups you can check individually.

Follow the designer's directions for marker placement. A marker at the start of each group means something different from a marker in its final stitch. Write down which convention you chose if it is not obvious.

At the row end, check the expected stitch count where one is provided. Completing the expected number of groups does not prove that every group has the correct number of stitches. Likewise, a correct total stitch count does not necessarily prove that the texture sequence is right.

Leave a stopping note that names the next action

“Row 38” is a weak stopping note because it does not say whether that row is finished. A better note might read:

“Project row 38 complete. Repeat row 2 complete. Next: repeat row 3. Pattern page 4.”

If you stop halfway across, say so. Add a removable marker at a recognizable point if it will help, but do not advance a completed-row counter for a partial row. Note the group or stitch where you paused instead.

A quick photograph can provide additional context. It should support the written record, not replace an exact statement of what comes next.

Check the record after undoing work

If you remove rows, update the record to match the fabric that remains. Do not leave the total counting rows that no longer exist.

First identify the last intact completed row. Then adjust the total, repeat position, and any affected repeat tally. If you undid only part of the current row, the completed-row total may not need to change.

Read the next instruction before resuming. When the counter and fabric disagree, pause to resolve the difference instead of choosing whichever number seems more convenient. The counter records your actions; it cannot verify the stitches for you.

FAQ

  • Should I reset the total after each repeat? Usually it is clearer to keep a running total and track repeat position separately. Resetting can work for a section, provided you record its starting point and preserve any number you will need later.
  • Do turning chains count as a row? Follow your pattern's convention. A turning chain is not automatically an extra completed row. If the instructions leave the numbering unclear, check the designer's notes before setting up the tracker.
  • What if I forget to advance the counter? Compare your last checkpoint with the fabric and pattern. Correct the record only after identifying what you actually completed. Then return to your usual counting routine; there is no need to rebuild the entire tracking system.